About Saltbuster

Saltbuster was designed to take advantage of the Salt-X technology by
combining a general purpose detergent with Salt-X. The result was an industrial cleaner/ wash that not only removes mild to medium soils, grease, oil, and hydrocarbons but also removes even the harshest of salt buildup!

Fresh water (which contains chlorine) and ordinary soaps (which for the most part contain salt as a building agent) will not remove stubborn salt film from surfaces. This film is the first stage of corrosion! Saltbuster works quickly to deactivate, dissolve and remove this film, thus extending
the usable life of any surface exposed to salt.

A unique corrosion inhibitor in Saltbuster actually leaves a dry, non-oily coating to help protect temporarily against further salt exposure. Repeated use in the field by retail, industrial and military customers have shown that when used regularly as part of a daily or weekly Preventive Maintenance program, Saltbuster can also add years to the useful life
of equipment.

How to Use Saltbuster

Mix 8oz (236 ml) Saltbuster per gallon of water. Wet surface liberally, let sit for 5 minutes, scrub if necessary and rinse with fresh water. Saltbuster should be applied by hand, mop, sponge, brush or foam gun. For maximum results, use Saltbuster each time equipment is exposed to salt and salt water.

For removing Salt Residue from Commercial Flooring, Boat & Ship decks:

1. Sweep the floor of any granulated salt and other debris

2. Mix Saltbuster in your mop bucket or floor scrubber.

3. Apply the solution to the floor or boat deck and let it sit for 5 minutes.

4. Pick up the solution with mop, wet/dry vacuum or floor scrubber.

5. Repeat Steps 1-4 if there is still salt residue on the floor.

Back to Top